Flowmeter
Pressure Transmitter
Level Measurement
YTC Control Valve Accessories
HKC Automation Controls
ABB Valve Positioner
Mass Flow Controller
Doppler Current Meter
Pressure Switch
Yokogawa Flowmeter
Digital Pressure Gauge
Pressure Sources
Newsletter
for wholesale
about the latest offers and deals Subscribe today!

EJX430A Gauge Pressure Transmitter
  Yokogawa EJX430A pressure transmitter is used to measure the pressure of gas, liquid and steam, then transform it into a 4-20 madc current signal output.
Description

1Technical parameters
EJX430A gauge pressure transmitter
Type H capsule A capsule B capsule
Measurement span -100 ~ 500 kPa -0.1 ~ 3.5 MPa -0.1 ~ 16 MPa
(-400 ~ 2000 inH2O) (-14.5 ~ 500 psi) (-14.5 ~ 2300 psi)
Measurement range 2.5 ~ 500 kPa 0.0175 ~ 3.5 MPa 0.8 ~ 16 MPa
(10 ~ 2000 inH2O) (2.5 ~ 500 psi) (12 ~ 2300 psi)
Accuracy ±0.04% ±0.04% ±0.04%
Protection level IP67, NEMA 4X,and  JIS C0920 immersion type
Explosion-proof instructure FM, CENELEC ATEX, CSA
Output signal 4 ~ 20 mA DC 或FOUNDATION™fieldbus, PROFIBUS PA two wire system of digital communication
Power 10.5 ~ 42 V DC (本安型: 10.5 ~ 30 V DC)
Environment temperature -40 ~ 85 ℃(-40 ~ 185 °F) (normal)
-30 ~ 80 ℃(-22 ~ 176 °F) (Built-in indicator in)
Process temperature -40 ~ 120 ℃(-40 ~ 248 °F) (normal)
Maximum pressure 16 MPa (2300 psi) 25 MPa (3600 psi)
Installation 2″pipe installation
Wetted material 316LStainless steel ((Diaphragm material for alloy C-276))
Flange size ASTM CF-8M
Amplifier shell Cast aluminum alloy

  

































2、Production selection list

  Basic specification code: EJA430A-DAS5A-92NN

  EJA430A Guage pressure transmitter

Output Signal
-D 4 to 20 mA DC with digital communication (BRAIN protocol)
-E 4 to 20 mA DC with digital communication (HART protocol, refer to GS 01C22T01-00E)
-F Digital communication (FOUNDATION Fieldbus protocol, refer to GS 01C22T02-00E)
  -G Digital communication (PROFIBUS PA protocol, refer to GS 01C22T03-00E)
Measurement
span(capsule)
A 0.03-3MPa
B 0.14-14MPa
Wetted parts
material*9
S# SCS14A    SUS316L *2  SUS316 *11
H# SCS14A    Hastelloy C-276 *3*10   SUS316 *11
M# SCS14A    Monel*3    SUS316 *11
T SCS14A    Tantalum *3  SUS316 *11
A# Hastelloy C-276 equivalent*4 Hastelloy C-276 *3*10  Hastelloy C-276*10
D Hastelloy C-276 equivalent*4 Tantalum *3  Hastelloy C-276*10
B# Monel equivalent*5    Monel*3   Monel
Process connection
0 without process connector (Rc1/4 female on the cover flanges)
1 with Rc1/4 female process connector
2 with Rc1/2 female process connector
3 with 1/4 NPT female process connector
4 with 1/2 NPT female process connector
☆5 without process connector (1/4 NPT female on the cover flanges)
Bolts and nuts material
☆A JIS SCM435 3MPa 14MPa
B JIS SUS630 3MPa 14MPa
C JIS SUH660 3MPa 14MPa
Installation
-2 Vertical impulse piping type, right side high pressure, process connector upside*6
-3 Vertical impulse piping type, right side high pressure, process connector downside*6
-6 Vertical impulse piping type, left side high pressure, process connector upside*6
-7 Vertical impulse piping type, left side high pressure, process connector downside*6
-8 Horizontal impulse piping type, right side high pressure*7
☆-9 Horizontal impulse piping type, left side high pressure*7
  
Electrical connection
0 G1/2 female, one electrical connection
☆2 1/2 NPT female, two electrical connections without blind plug
3 Pg 13.5 female, two electrical connections without blind plug
4 M20 female, two electrical connections without blind plug
5 G1/2 female, two electrical connections and a blind plug
7 1/2 NPT female, two electrical connections and a blind plug
8 Pg 13.5 female, two electrical connections and a blind plug
9 M20 female, two electrical connections and a blind plug
A G1/2 female, two electrical connections and a SUS316 blind plug
C 1/2 NPT female, two electrical connections and a SUS316 blind plug
D M20 female, two electrical connections and a SUS316 blind plug
Integral indicator
D Digital indicator
E Digital indicator with the range setting switch*8
☆N (None)
Mounting bracket
☆A SECC Carbon steel     2-inch pipe mounting (flat type)
B SUS304    2-inch pipe mounting (flat type)
J SUS316    2-inch pipe mounting (flat type)
C SECC Carbon steel     2-inch pipe mounting (L type)
D SUS304    2-inch pipe mounting (L type)
K SUS316    2-inch pipe mounting (L type)
N (None)




 

 

  The‘☆’marks indicate the most typical selection for each specification. Example: EJA430A-DAS5A-92NN The ‘#’marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use ofSUS316 material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for details.

  *1:Low pressure side wetted parts material: Cover flange; SCS14A, Process connector; SCS14A,Capsule;SUSF316L, SUS316L or ASTM grade 316L (Diaphragm; Hastelloy C-276 or ASTM N10276), Vent plug;SUS316 or ASTMgr ade 316

  *2:Not applicable for Output signal code F and G.

  *3:Users must consider the characteristics of selected wetted parts material and the influence of process fluids.The use of inapp ropri-ate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. Itis also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid cancontaminate the user's process fluids.Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite,and high-temperature steam (150 °C [302 ° F] or above). Contact Yokogawa for detailed information of the wetted parts material.

  *4:Hastelloy C-276 or ASTM N10276.

  *5:SUS316 or ASTM grade 316.

  *6:SUS304 or ASTM grade 304. Forged version may be used.

  *7:SUS316 or ASTM grade 316. Forged version may be used
EJA110A Differential pressure transmitter/EJA118W/EJA118Y/EJA118N Double flanges differential pressure transmitter/EJA120A micro differential pressure transmitter/ EJA130A High performance differential pressure transmitter/EJA210A/EJA220A  Flange Mounted Differential Pressure Transmitter/ EJA310A Absolute Pressure Transmitter/ EJA430A Gauge Pressure Transmitter/ EJA438W and EJA438N Diaphragm Sealed Gauge Pressure Transmitters/ Model EJA440A High Pressure Transmitter/EJA510A and EJA530A Absolute and Gauge Pressure Transmitters/Model EJX110A Differential pressure transmitter/EJX118W Diaphragm Sealed Differential Pressure Transmitters/EJX210A Flange Mounted Differential Pressure Transmitter/EJX430A Gauge pressure transmitter/ EJX438A Diaphragm seal pressure transmitter/EJX910A Multivariable Pressure Transmitter 
 



 

saleMan 1:
saleMan 2:
saleMan 3:
saleMan 4: