Flowmeter
Pressure Transmitter
Level Measurement
YTC Control Valve Accessories
HKC Automation Controls
ABB Valve Positioner
Mass Flow Controller
Doppler Current Meter
Pressure Switch
Yokogawa Flowmeter
Digital Pressure Gauge
Pressure Sources
Newsletter
for wholesale
about the latest offers and deals Subscribe today!

E+H Deltapilot M FMB52
  Static pressure level measuring system Adopted CONTITE measurement unit sensor Condensation resistance, long-term and high stability HART, PROFIBUS PA or FF fieldbus
Description

1. product introduction

  Static pressure level measuring system Adopted CONTITE measurement unit sensor Condensation resistance, long-term and high stability HART, PROFIBUS PA or FF fieldbus

  Advantages

  1. High repeatability ,long-term and high stability

  2. Range than 100:1

  3. Seal welding CONTITETM measurement unit:

  - Condensation resistance, climate protection ability

  - high accuracy: ±0.2 %, selectable ±0.1 %

  - small temperature influence

  4. Modular design, that can be exchanged with differential, static pressure and gauge pressure, like:

  - alternative display module

  - Universal electrical package

  5. It is easy to Instrument configuration Settings without operational software

  6. Simple, safe menu heuristic instrument operation

  - through display unit to site operation

  - Through 4...20mA HART to operate

  - Through PROFIBUS PA to operate

  - Through FF fieldbus to operate

  7. Through a number of international certification (like. ATEX, FM, CSA, etc.)

  8. Certification of using drinking water: KTW, NSF

2. application fields

  Static pressure measurement sensor is suitable for the measurement of the following situations:

  1. A variety of process industries such as pharmaceutical, food industry in the liquid and paste medium Liquid level, size, or quality

3.Technology information

Measurement principle Hydrostatic
Characteristic / Application Pressure transmitter for Pressure or hydrostatic level measurement with flush mounted metallic CONTITE measuring cell:
- hermetically welded
- absolute condensation tight
- climate-resitant
- long-term stable
- Lowest temperature influences

Cable version
Supply / Communication 4...20mA HART:
10,5...45V DC
Ex ia: 10,5...30V DC
PROFIBUS PA /
FOUNDATION Fieldbus:
9...32V DC (Non Ex)
Accuracy Standard 0,2%
Optional 0,1%
Long term stability 0,05% of URL/year
Ambient temperature -40°C...85°C
(-40°F...185°F)
Process temperature PE cable: -10°C…70°C / 14°F…158°F
FEP cable: -10°C…80°C / 14°F…176°F
Process pressure absolute / max. overpressure limit 40 bar (600 psi)  
Pressure measuring range 100mbar...10bar
(1.5psi...150psi)
Main wetted parts Alloy C
316L
Cable (PE/FEP)  
optional coating AuPt
optional coating AuRh
Process connection Thread:
G1 1/2, MNPT1 1/2
Flange:
DN40...DN100,
ASME 2"...4",
JIS 10K
Max. measurement distance 100m (328ft) H2O
Output 4...20 mA HART
PROFIBUS PA
FOUNDATION Fieldbus
Certificates / Approvals ATEX, FM, CSA, CSA C/US, IEC Ex, TIIS, INMETRO, NEPSI
Overfill prevention WHG
SIL
EN10204-3.1
NACE
Marine
Drinking water
Options Separate housing
Initial device settings
Overvoltage protection
Specialities Modularity to differential pressure and process pressure devices (replacable display, universal electronics)

diagnostic functions

Hermetically sealed Contite measuring cell (condensate-resistant and climatic-proofed)
Application limits If pressurized, usage of two pressure transmitters to measure the differential pressure (electronic dP) Observe ratio head pressure : hydrostatic pressure
In case of an open tank or shaft use FMB53 with mounting clamp.
 
Measurement principle Hydrostatic
Characteristic Pressure transmitter for pressure or hydrostatic level measurement with flush mounted metallic CONTITE measuring cell:
- hermetically welded
- absolute condensation tight
- climate-resitant
- long-term stable
- Lowest temperature influences
Cable version
Supply / Communication 4...20mA HART:
10,5...45V DC
Ex ia: 10,5...30V DC
PROFIBUS PA /
FOUNDATION Fieldbus:
9...32V DC (Non Ex)
Accuracy Standard 0,2%
Optional 0,1%
Long term stability 0,05% of URL/year
Process temperature PE cable: -10°C…70°C / 14°F…158°F
FEP cable: -10°C…80°C / 14°F…176°F
Ambient temperature -40°C...85°C
(-40°F...185°F)
Measuring range 100mbar...10bar
(1.5psi...150psi)
Max. overpressure limit 40 bar (600 psi)
Process connection Thread:
G1 1/2, MNPT1 1/2
Flange:
DN40...DN100,
ASME 2"...4",
JIS 10K
Output 4...20 mA HART
PROFIBUS PA
FOUNDATION Fieldbus
Certificates / Approvals ATEX, FM, CSA, CSA C/US, IEC Ex, TIIS, INMETRO, NEPSI
Overfill prevention WHG
SIL
EN10204-3.1
NACE
Marine
Drinking water
Options Separate housing
Initial device settings
Overvoltage protection
Specialities Modularity to differential pressure and process pressure devices (replacable display, universal electronics)

diagnostic functions

Hermetically sealed Contite measuring cell (condensate-resistant and climatic-proofed)
Application limits If pressurized, usage of two pressure transmitters to measure the differential pressure (electronic dP) Observe ratio head pressure : hydrostatic pressure
In case of an open tank or shaft use FMB53 with mounting clamp.
 
E+H Deltabar FMD72/ E+H Deltabar M PMD55/ E+H Deltabar S FMD76/ E+H Deltabar S FMD77/E+H Deltabar S FMD78/ E+H Deltabar S PMD70/ E+H Deltabar S PMD75/
E+H Deltapilot M FMB50/ E+H Deltapilot M FMB51/ E+H Deltapilot M FMB52/ E+H Deltapilot M FMB53/ E+H Deltapilot S FMB70/ E+H Waterpilot FMX21/
E+H Cerabar M PMC51/ E+H Cerabar M PMP51/ E+H Cerabar M PMP55/ E+H Cerabar S PMC71/ E+H Cerabar S PMP71/E+H Cerabar S PMP75/ E+H Cerabar T PMC131/ E+H Cerabar T PMP131/ E+H Cerabar T PMP135/E+H Ceraphant T PTC31/E+H Ceraphant T PTP31/ E+H Ceraphant T PTP35/
saleMan 1:
saleMan 2:
saleMan 3:
saleMan 4: