Flowmeter
Pressure Transmitter
Level Measurement
YTC Control Valve Accessories
HKC Automation Controls
ABB Valve Positioner
Mass Flow Controller
Doppler Current Meter
Pressure Switch
Yokogawa Flowmeter
Digital Pressure Gauge
Pressure Sources
Newsletter
for wholesale
about the latest offers and deals Subscribe today!

TW8400 Manual Water-Media Pressure Pump
Model:TW8400
Description

1. BRIEF INTRODUCTION
This TW8400 Manual Water-Media Pressure Pump (Medium: water) adopts the open-type structure, using the high-quality stainless steel material which has a good anti-rust capability. Firstly pre-pressurize the pressure pump manually, so that it has a certain beginning pressure, then regulate the voltage using voltage regulator. Therefore the stability of the product is enhanced, and also achieving a large voltage range.
2.TECHNICAL INDICATORS AND TECHNICAL PARAMETERS:
1.Pressure output: (0~6) MPa; (0~16)MPa; (0~25)MPa; (0~35)MPa; (0~40)MPa; (0~60)MPa; (0~72)MPA;
2.Stability: 0.05%F.S;
3.Pressure connection: M20×1.5;
4.Size: 400×350×170;
5.Weight: 12Kg approximately;
3. WORK PRINCIPLE
TW8400 Manual Water-Media Pressure Pump is composed of manual pressure pump, pressure regulator, micro-adjusting value, cut-off value, pressure output connection and water cup. Firstly pre-pressurize using the manual pressure pump; then adjust the pressure regulator or micro-adjusting value, so that you will get the pressure value which you required. The increasing or decreasing pressure can be quite stable during the verification process. See the figure below shown the operation principle:
4. How to use
1. After filling the water into the water cup, lift the pump at 45°, remove the plug nut on one side of the one-way inlet value; Then pull out the pipe. Immediately insert the quick-change connector after water flowing out from water cup; make sure there is no air bubble inside. As shown in the figure below: 

2.If it is the first time to use, close the cut-off value and using the pressure pump to pressurize. This process need to take a longer time. When there is a clear feeling of the pressure, lift the pressurized pump handle at about 10 ° ~ 15 °. (The pre-pressurized pressure of the pressure pump designed is 10~15MPa). Repeat the above operation three times. If the above pressurizing still does not work, remove the pin roll which connects the plunger and pressure pump handle. Insert the pin roll into the plunger hole; fill the water into the pressure pump after taking out the plunger. Insert the plunger until the middle position, and then pre-pressurize (using pressurizing pump). Due to plug or pull out the plunger frequently, there maybe water leakage along the plunger; please pressurize the nut gently.
3.Close the cut-off value during the test process and regulate the pressure regulator on the middle position in the mean time.
4.After using the pressure pump to pre-pressurize, continue to do the increasing and reducing pressure verification work (using the pressure regulator to regulate the pressure).
5.When work completed, fit on the pipe plug avoiding something to go inside the system. 
5.WARNINGS AND SOLUTIONS OF THE COMMON FAULTS
1. The work medium is pure water.
2. The pre-pressurized of the manual pump is 10~15MPa.
3. Before using the pump every time, clean the impurity inside the gauge in order to Avoid the error unnecessary.
4. When doing verification, watch out the water expending.
5. When pressurizing, if there is water leakage, it means the internal gasket of the connection is broken. If the pressure below 80MPa, use Φ9×2.5“○”gasket; If the pressure is above 80MPa, please use copper gasket.
6. In the process of the verification or ending, please gently remove the cut-off value in order to avoid damaging the water cup.
7. After using several times, change the water and remove the impurity inside the water cup.

More  Products
YJY-6 Pressure gauge validator/TWY100 Digital Pressure Gauge/ TW8620C Manual Pneumatic Pressure Pump/ TW8610T Manual Hydraulic Pressure Pump/TW8400 Manual Water-Media Pressure Pump/TW-1600T Deadweight Pressure Tester/TW-1000T Deadweight Pressure Tester/TW-250T Deadweight Pressure Tester/TW-600T Deadweight Pressure Tester/TW-60T Deadweight Pressure Tester/TW-6T Deadweight Pressure Tester/TV-600 T Deadweight Pressure Tester/TV-60T Deadweight Pressure Tester/TV-6T Deadweight Pressure Tester/T18 portable gas pressure pump/T17 portable pressure pump


 

saleMan 1:
saleMan 2:
saleMan 3:
saleMan 4: