1. Product Information

　　DCT1188C is a widely used, versatile, clamp-on, transit-time ultrasonic flowmeter, It has a very simple installation, without breaking the tube, no disruption of water supply, enables customers to easily implement flexible pipe flow measurement, products can also be equipped with a permanent clamp-on installation, without daily maintenance，long-term to provide credible, no deviation measurement. It uses the most advanced digital technologies and intelligent adaptive acoustic technology, measurement stability make it more prominent, At the same time, it uses a focused acoustic patented, make the products in the continuous measurement of reception quality was significantly enhanced.

　　DCT1158C Standard configuration as shown above

　　① Transmitter②Sensor③Tube bundle④Coupling agent⑤Fixing screws

　　DCT1158C is made up of transmitter and sensor ，Clamp-on sensors with a simple to install, no broken pipes, and other characteristics, esecially suitable for the flow measurement of various kinds of pressure requirements, this installation has no moving parts, compared with the traditional measuring machine, it has the remarkable characteristics of high reliability and low maintenance rate.

　　DCT1158C uses an advanced modular design, independent menu operation, LCD backlit display, independent menu operation .product transmitter protection grade reaches IP65, Suitable for harsh environments such as moisture and soaking.

　　DCT1158C collection of the current RS485 / RS232 communication interface used in industrial applications,4-20mA current signal, pulse output ,Modbus protocol, , may constitute a flow measurement network requirements. In addition, the product can be extended to use solar energy, lightning protection power supply (Rem power) , explosion-proof and other functional modules, So that products can meet a variety of application environments.

　　2. Features

　　Flow Measurement

　　No fault working time 50000 hours test

　　Sub-period traffic statistics

　　Keyboard keys life of more than 200,000 times

　　3. Apply to the fluid

　　Suitable for pure liquid, In the liquid without impurities, particles, suspended matter and bubbles, and it is full pipe flow measurement

　　4. Apply pipe

　　Carbon steel

　　stainless steel

　　PVC

　　Cast iron

　　5.application

　　★ Water (hot water, chilled water, city water, sea water, waste water, etc.);

　　★ Sewage with small particle content;

　　★ Oil (crude oil, lubricating oil, diesel oil, fuel oil, etc.);

　　★ Chemicals (alcohol, acids, etc.);

　　★ Plant effluent;

　　★ Beverage, liquid food;

　　★ Ultra-pure liquids;

　　★ Solvents and other liquids

　　6.Specifications

　　Wiring and Size

　　Transmitter Size

　　Sensor Size(mm)

　　CP- type Clamp-on sensor(Standard)

　　Shell material: PC Industrial Plastics

　　Explosion levels: E x ia ⅡBT4

　　Weight: 1.5kg (With cable)

　　CH- type High temperature Clamp-on sensor

　　Shell material: Alloy die casting

　　Explosion levels: E x ia ⅡBT4

　　Medium temperature: -40℃~+150℃

　　Weight: 4.5kg (With cable)

　　MC- type Permanent clamp-on sensor

　　Shell material: Carbon steel (optional stainless steel)

　　Explosion levels: E x ia ⅡBT4

　　Medium temperature: -40℃~+80℃

　　Weight: 3kg (With cable)

　

　　Explosion-proof enclosure

　　BXK-T Explosion-proof enclosure(mm)

　　Explosion levels: Ex dⅡBT4

　　Ex dⅡCT4

　　Ex dⅡBT6

　　Ex dⅡCT6

　　Electrical Interface:4×G1/2“

　　Lightning protection power supply(mm)

　　Lightning protection power supply (Rem Power)

　　Type:FFH-001

　　Power supply lightning protection performance:

　　Lightning protection level: Ⅱ (IEC EN 61643-11.2001)

　　Nominal voltage:AC90~245V,50/60Hz

　　The maximum continuous operating voltage AC 265V

　　Working temperature: -40 ~ + 60 C

　　In the lightning current <20KA conditions to ensure self-recovery capability 20 times

　　Ultrasonic sensors lightning protection performance:

　　Nominal operating voltage DC 36V

　　The maximum continuous operating voltage DC 42V

　　The maximum transmission bandwidth: 5MHz

　　In the lightning current <20KA conditions to ensure self-recovery capability 20 times

　　Installation, site selection

　　V-type installation method is applicable diameter range 25mm-500mm(On the same side, the choice of site should not be installed at the top or bottom of the pipe)

　　Z-type installation method is applicable diameter range100mm-6000mm (The opposite side, the choice of site should not be installed at the top or bottom of the pipe)

　　Installation diagram

90 degree bend

T-Tee

Diffuser

Orifice

Regulating valve

Pumps

Vertical mounting

　　Site selection principles

　　1. Should avoid clock 6 or 12 point position, so as to avoid sediment at the bottom of the pipe or pipes upper part of the bubble, air-pocket caused by signal attenuation.

　　2. Fully considering the tube wall scaling condition, as far as possible choose no scaling section measuring, can fully meet, need to think about scaling for lining in order to get better the measurement accuracy.

Accuracy：0.2
UCT3488 Series High Dynamic Response Ultrasonic Flowmeter
UCT3488D Multi-channel ultrasonic flowmeter
 
Accuracy：0.5
DCT1188C multifunctional clamp-on type ultrasonic  flowmeter
DCT1188W multifunctional insertion type ultrasonic flowmeter
DCT1288i High dynamic response of portable type ultrasonic flowmeter
 
Accuracy：1.0
DCT1158C Economical clamp-on type ultrasonic flowmeter
DCT1158SE Battery-powered type ultrasonic flowmeter
DCT1158W Economical insertion type ultrasonic flowmeter
DCT1258 Handheld Type Ultrasonic Flowmeter
 
Accuracy：1.5
DCT1158SE Battery-powered Insertion type ultrasonic flowmeter
DCT1438K Buckle -measured type ultrasonic flowmeter
 
Heat（cold）meters
HCM1158LH Buildings dedicated type heat（cold）meters
HCM1158LH-K Central air-conditioning of buildings dedicated meter
HCM1188H Multifunctional type Ultrasonic Heat Meters
HCM1438LS Heat (cold)Meters