Flowmeter
Pressure Transmitter
Level Measurement
YTC Control Valve Accessories
HKC Automation Controls
ABB Valve Positioner
Mass Flow Controller
Doppler Current Meter
Pressure Switch
Yokogawa Flowmeter
Digital Pressure Gauge
Pressure Sources
Newsletter
for wholesale
about the latest offers and deals Subscribe today!

ADMAG AXR Two-wire Magnetic Flowmeters
  The ADMAG AXR two-wire magnetic flowmeter can be installed in the two-wire system without any AC power source, thus drastically reducing the initial instrumentation cost.
Description

  一、Product introduction

  The ADMAG AXR two-wire magnetic flowmeter can be installed in the two-wire system without any AC power source, thus drastically reducing the initial instrumentation cost.

  The ADMAG AXR is the world's first two-wire magnetic flowmeter which employs the fluid noise free "Dual Frequency Excitation Method," achieving excellent stability for instrumentation.

  Like the AXF four-wire magnetic flowmeter series, the ADMAG AXR has user-friendly functions such as a full dot-matrix LCD indicator, electrode adhesion level diagnosis function, and a multi-lingual display. The magnet switches can be used for checking and setting parameters without opening the case cover.

  Note: The “Dual Frequency Excitation Method” is a Yokogawa's innovation.

  二、Features

  Efficiency

  2-Wire Benefit

  An Extra AC power supply is not necessary. 2-wire loop powered performance allows direct connection to DCS I/O card possible - allowing for real cost reductions.

  ·Reduce the CAPEX and OPEX on your site.

  ·Power saving : 1 to 4% power consumption of typical 4-wire magnetic flowmeter.

  ·Annual CO2 emissions can be reduced from approximately 73kg to 1.4kg (compared to a standard 4-wire magnetic flowmeter).

  Reliability

  Dual Frequency Performance

  Only YOKOGAWA can provide unique and advanced excitation method.

  “Dual Frequency Excitation“ achieves stable measurement, zero stability and quick response times. The exclusive technology for stable and reliable measurement on your site.

  Noise reduction technology

  Flow noise reduction is further achieved by incorporating smooth mirror finished PFA liners and special surface finished electrodes. This is further enhanced with aligned super high density coils that generate a stronger magnetic field.

  Safety

  SIL2

  YOKOGAWA believes safety should not be an option, it should be standard in all modern products. AXR is the first 2-Wire Magmeter of SIL2 Safety Integrity Level (IEC 61508) certified. AXR is capable of SIL2 single use and SIL3 redundant use, as standard.

  Parameter Operation

  AXR has magnet switches for parameter setting. Users can access the functions without removing the case cover in hazardous, humid, and dusty environment.

  Friendly

  HART 7 support

  In addition to HART 5, the new ADMAG AXR supports HART 7, the latest HART protocol, eliminating the need for convertors to connect with HART-compliant control systems. HART 7 also supports and enables the automatic issuance of alarms when the device's settings are modified or a problem is detected by self-diagnostics.

  Adhesion Diagnostic Level Function

  The electrode is one of the most important parts of a Magnetic flowmeter. Only YOKOGAWA has “Adhesion Diagnostic Level Function”. It diagnoses the condition of electrode surface and indicates the adhesion/coating in 4 levels. Users can change the detection level (threshold) depending on each individual process condition. This allows for predictive maintenance and reduced operating costs.

  Alarm Indication

  YOKOGAWA employs Full-dot matrix LCD indicator. It can display up to 3 lines as required by the user and is available in multiple languages. Under the unit has an alarm, a clear message is displayed along with a solution

  三、Specifications

   
Structure Integral flowmeter
Excitation Method Dual frequency excitation
Nominal Pipe Size
[Unit : mm (approx. inch)]
General-purpose use: 25 (1.0) to 200 (8.0)
Explosion proof Type: 25 (1.0) to 200 (8.0)
Supply Voltage Operating voltage range 14.7 to 42 V DC Two-wire system
Output Signals Current output
Digital output(One output can be selected from pulse, alarm or status outputs.)
Electrode Material Stainless steel-JIS SUS316L (AISI 316L SS/EN 1.4404 equivalent), Hastelloy C276 equivalent, Tantalum, Platinum-iridium
Fluid Temp. - 40 to 130 deg.C (- 40 to 266 deg.F) [ depends on model type ]
Ambient Temp. - 40 to 55 deg.C (- 40 to 131 deg.F) [ depends on model type ]
Accuracy 0.5% of rate (Note 1)
[ depends on nominal pipe size and fluid condition ]
Fluid Conductivity 10 micro-S/cm or larger
[ depends on nominal pipe size and fluid condition ]
Lining Fluorocarbon PFA (Mirror-finished lining surface) (Note 2)
Lay Length
[Unit : mm (approx. inch)]
Lay length code 1: Wafer ; size 80 (3.0) to 200 (8.0),
  Flange ; size 25 (1.0) to 200 (8.0)
Lay length code 2: Wafer ; size 25 (1.0) to 200 (8.0)
Indicator Full dot-matrix LCD
Operational Switch 4 magnet switches (including push switches)
Self Diagnosis Electrode adhesion diagnosis, Coil open, etc.
Alarm Message Alarm message with countermeasure is indicated
( English, German, French, Italian, Spanish, Japanese )
Options Direction change of the electrical connection, Special Gaskets,
Bar-magnet for operation of magnet switches, etc.
 
saleMan 1:
saleMan 2:
saleMan 3:
saleMan 4: