Flowmeter
Pressure Transmitter
Level Measurement
YTC Control Valve Accessories
HKC Automation Controls
ABB Valve Positioner
Mass Flow Controller
Doppler Current Meter
Pressure Switch
Yokogawa Flowmeter
Digital Pressure Gauge
Pressure Sources
Newsletter
for wholesale
about the latest offers and deals Subscribe today!

EJX130A Differential Pressure Transmitter
 The high performance differential pressure transmitter EJX130A features single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure.
Description

  1. product

  The high performance differential pressure transmitter EJX130A features single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure. EJX130A outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications. Other key features include quick response, remote set-up using communications, diagnostics and optional status output for pressure high/low alarm. The multi-sensing technology provides the advanced diagnostic function to detect such abnormalities as an impulse line blockage or heat trace breakage. FOUNDATION Fieldbus protocol type is also available. All EJX series models in their standard configuration, with the exception of the Fieldbus type, are certified by TÜV as complying with SIL 2 for safety requirement.

  2 specification

  EJX130A high performance differential pressure transmitter
Mcapsule Hcapsule
Measuring span -100~100kPa
(-400~400inH2O)
-500~500kPa
(-2000~2000inH2O)
Measuring range 1~100kPa
(4~400inH2O)
5~500kPa
(20~2000inH2O)
Accuracy ±0.04%
Protection level IP67NEMA 4X  JIS C0920
Explosion-proof specifications FMCENELEC ATEXCSAIECEx
Output signal 4~20mA DC or FOUNDATION™ fieldbus,2-wire system
power BRAIN/HART: 10.5~42V DC
(
EExi: 10.5~30V DC)
Fieldbus: 9~32V DC
(
EExiEntity 9~24V DC,EExiFISCO  9~17.5V DC)
Environment temp -40~85(-40~185℉) (normal)
-30~80
(-22~176℉) (built indicator in)
Process temp -40~120(-40~248℉) (normal)
Max operation pressure 32MPa(4500psi)
Installation 2-inchpipe line
Wetted
parts
materials
Capsule 316L SST(diaphragm: HC-276)
Chamber flange 316 SST
Shell Aluminum alloy orASTM CF-8M stainless steel (optional)

 

 

saleMan 1:
saleMan 2:
saleMan 3:
saleMan 4: